DESEINOR Sealing Fittings
DESEINOR sealing fittings are used to connect RMC (Rigid Metal Conduit) and IMC (Intermediate Metal Conduit). They can be installed vertically or horizontally. The filling rate is 40%, and the filling amount of wires in the fitting should not exceed this value to ensure the sealing effect.
These fittings can seal the wires inside the conduits, minimizing the leakage of gases and vapors, preventing flames from spreading from one electrical device to another, confining explosions within the sealed conduits, and preventing pressure accumulation in the conduit system. They are suitable for hazardous locations where flammable gases, vapors, metal powders, or dust are present.
